Installation of IQM actuator

IQM series actuator is suitable for the control of 1200 times per hour. 34-1 IEC to S4 50%.

Standard IQM actuator has a dynamic brake device. If the actuator and valve for very accurate control, in accordance with the instructions in the wiring diagram, in the terminal box to carry out the corresponding connection, for the operation of the machine to achieve the brake control. Using the dynamic brake, will make the motor heat, so it should be reduced to the number of actuators, to prevent the motor temperature protection jump.

The method of adjusting the IQM series is the same as the standard.

IQML linear thrust block

The actuator base can be attached to a screw assembly, which can provide a minimum of 8mm (3/8 inch) to the maximum 120mm (43/4 inch) linear stroke.

The IQML actuator is provided with a matching bracket, which is composed of 4 pillars and a base flange matched with the valve.